| Cleaning Operations |
|
| Finish Clean Block (ready block for assembly) |
$55.00 |
| Jet Cleaning (degreasing, per load) |
$45.00 |
| Degrease Block Only (cam bearings must be removed) |
$30.00 |
| Degrease Head (disassembled) |
$20.00 |
| Remove Cam Bearings |
$15.00 |
| Remove Freeze Plugs |
$15.00 |
| Stud Removal (per stud) |
$2.00 |
| Thread Chase Bolt Hole (each) |
$0.25 |
| Connecting Rod and Piston Work |
|
| Clean & Check Connecting Rod (each) |
$6.25 |
| Disassemble Piston/Rod Assembly (each) |
$3.00 |
| Hang Piston/Rod Assembly (each) |
$3.00 |
| Hone Piston Pin Bore (each) |
$4.00 |
| Light Hone Rod Bearing Housing (each) |
$7.50 |
| Recondition Connecting Rod (each) |
$20.00 |
| Remove & Replace Bushing (each) |
$15.00 |
| Remove & Replace Piston/Rod Assembly (each) |
$5.60 |
| Crankshaft Work |
|
| Grind Crankshaft |
$125.00 |
| Polish Crankshaft |
$37.80 |
| Cylinder Work |
|
| Bore & Hone V8 |
$150.00 |
| Bore & Hone V8 w/Torque Plates |
$200.00 |
| Bore & Hone V6 |
$128.00 |
| Bore & Hone 4 cyl. |
$100.00 |
| Bore & Hone 1 cyl. |
$45.00 |
| Hone 8 Cyl. Block |
$80.00 |
| Hone 6 Cyl. Block |
$65.00 |
| Hone 4 Cyl. Block |
$50.00 |
| Hone 1 Cyl. Block |
$25.00 |
| Machine Block for Press-in Sleeve (each, plus sleeve) |
$50.00 |
| Head Work |
|
| Drill steam holes in SBC 350ci Heads for 400ci Conversion (pair) |
$50.00 |
| Remove & Install Valve Guides (per guide with valve job) |
$5.00 |
| Remove & Install Valve Guides (per guide without valve job) |
$15.00 |
| Remove & Install Press-In Stud (per stud) |
$15.00 |
| Hardened Valve Seat Installation (each) |
$21.70 |
| Install Valve Seals (OHC per valve) |
$1.69 |
| Install Valve Seals (OHV per valve) |
$1.00 |
| Valve Job (cut seat and valve, per seat and valve) |
$10.00 |
| Hone Valve Guide (each) |
$5.00 |
| Performance Work |
|
| CC Cylinder Head |
$45.00 |
| Degree Camshaft (includes offset keyway or dowel) |
$75.00 |
| File Fit Performance Piston Rings (V8 Set) |
$75.00 |
| Porting and Polishing (per hour) |
$50.00 |
| Press Work |
|
| Remove & Replace Wheel Bearing (bearing not included) |
$40.00 |
| Disassemble Piston/Rod Assembly (each) |
$3.00 |
| Surfacing |
|
| Cylinder Deck (In-Line Blocks Only) |
$65.00 |
| Cylinder Head Deck Face |
$35.00 |
| Cylinder Head Intake or Exhaust Face |
$20.00 |
| Intake Manifold (inline) |
$20.00 |
| Intake Manifold (v-type) |
$40.00 |
| Exhaust Manifold (cast iron only) |
$30.00 |
| Miscellaneous Work |
|
| Bolt Extraction |
$20.00 |
| Glass Bead Blasting (per hour) |
$50.00 |
| Install Heli Coil |
$20.00 |
| Mig Welding (per hour) |
$60.00 |
| Remove & Replace Cam Bearings (bearings not included) |
$30.00 |
| Remove & Replace Freeze Plugs (freeze plugs not included) |
$20.00 |
| Popular Engine Prices |
|
| SBC 350 w/Roller Cam |
$1295.00 |
| SBC 350 Non Roller Cam |
$1095.00 |
| Ford 302 w/Roller Cam |
$1495.00 |
| Ford 302 Non Roller Cam |
$1295.00 |
| |
|
| |
|
| |
|
